faraphel/chrony
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

doc: update chrony.conf man page for recent changes

Browse source
This commit is contained in:
Miroslav Lichvar 2016-10-24 14:34:50 +02:00
parent 14a1059e43
commit 14647032b2
1 changed files with 48 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

51
doc/chrony.conf.adoc
View file

@ -156,6 +156,22 @@ clock. Together with the *trust* option this might be useful to allow a trusted
authenticated source to be safely combined with unauthenticated sources in authenticated source to be safely combined with unauthenticated sources in
order to improve the accuracy of the clock. They can be selected and used for order to improve the accuracy of the clock. They can be selected and used for
synchronisation only if they agree with the trusted and required source. synchronisation only if they agree with the trusted and required source.
*xleave*:::
This option enables an interleaved mode which allows the server or the peer to
send transmit timestamps captured after the actual transmission (e.g. when the
server or the peer is running *chronyd* with HW timestamping enabled by the
<<hwtimestamp,*hwtimestamp*>> directive). This can significantly improve the
accuracy of the measurements.
+
The interleaved mode is compatible with servers that support only the basic
mode, but peers must both support and have enabled the interleaved mode,
otherwise the synchronisation will work only in one direction. Note that even
servers that support the interleaved mode may respond in the basic mode as the
interleaved mode requires the servers to keep some state for each client and
the state can be dropped when there are too many clients (e.g.
<<clientloglimit,*clientloglimit*>> is too small), or it can be overwritten by
other clients that have the same IP address (e.g. computers behind NAT or
someone sending requests with a spoofed source address).
*polltarget* _target_::: *polltarget* _target_:::
Target number of measurements to use for the regression algorithm which Target number of measurements to use for the regression algorithm which
*chronyd* will try to maintain by adjusting the polling interval between *chronyd* will try to maintain by adjusting the polling interval between
@ -1072,8 +1088,10 @@ directive.
[[clientloglimit]]*clientloglimit* _limit_:: [[clientloglimit]]*clientloglimit* _limit_::
This directive specifies the maximum amount of memory that *chronyd* is allowed This directive specifies the maximum amount of memory that *chronyd* is allowed
to allocate for logging of client accesses. The default limit is 524288 bytes, to allocate for logging of client accesses and the state that *chronyd* as an
which allows monitoring of several thousands of addresses at the same time. NTP server needs to support the interleaved mode for its clients. The default
limit is 524288 bytes, which is sufficient for monitoring about four thousand
clients at the same time.
+ +
In older *chrony* versions if the limit was set to 0, the memory allocation was In older *chrony* versions if the limit was set to 0, the memory allocation was
unlimited. unlimited.
@ -1087,7 +1105,8 @@ clientloglimit 1048576
[[noclientlog]]*noclientlog*:: [[noclientlog]]*noclientlog*::
This directive, which takes no arguments, specifies that client accesses are This directive, which takes no arguments, specifies that client accesses are
not to be logged. Normally they are logged, allowing statistics to be reported not to be logged. Normally they are logged, allowing statistics to be reported
using the <<chronyc.adoc#clients,*clients*>> command in *chronyc*. using the <<chronyc.adoc#clients,*clients*>> command in *chronyc*. This option
also effectively disables server support for the NTP interleaved mode.
[[local]]*local* [_option_]...:: [[local]]*local* [_option_]...::
The *local* directive enables a local reference mode, which allows *chronyd* The *local* directive enables a local reference mode, which allows *chronyd*
@ -1705,6 +1724,32 @@ sendmail binary.
=== Miscellaneous === Miscellaneous
[[hwtimestamp]]*hwtimestamp* _interface_::
This directive enables hardware timestamping of NTP packets sent to and
received from the specified network interface. The network interface controller
(NIC) uses its own clock to accurately timestamp the actual transmissions and
receptions, avoiding processing and queueing delays in the kernel, network
driver, and hardware. This can significantly improve the accuracy of the
timestamps and the measured offset, which is used for synchronisation of the
system clock. In order to get best results, it is necessary to enable HW
timestamping on both sides receiving and sending the packets (i.e. server and
client, or both peers), and also enable the interleaved mode with the *xleave*
option in the <<server,*server*>> or the <<peer,*peer*>> directive.
+
This directive is supported on Linux 3.19 and newer. The NIC must support HW
timestamping, which can be verified with the *ethtool -T* command. The list of
capabilities should include _SOF_TIMESTAMPING_RAW_HARDWARE_,
_SOF_TIMESTAMPING_TX_HARDWARE_, _SOF_TIMESTAMPING_RX_HARDWARE_, and the filter
modes should have _HWTSTAMP_FILTER_ALL_. When *chronyd* is running, no other
process should be working with the clock on the NIC. If no *hwtimestamp*
directive is specified, *chronyd* will try to enable software timestamping.
+
An example of the directive is:
+
----
hwtimestamp eth0
----
[[include]]*include* _pattern_:: [[include]]*include* _pattern_::
The *include* directive includes a configuration file or multiple configuration The *include* directive includes a configuration file or multiple configuration
files if a wildcard pattern is specified. This can be useful when maintaining files if a wildcard pattern is specified. This can be useful when maintaining