Update documentation a bit more

INSTALL

@@ -71,11 +71,11 @@ If you want chrony to appear in the top level info directory listing, you need
 to run the install-info command manually after this step.  install-info takes 2
 arguments.  The first is the path to the chrony.info file you have just
 installed.  This will be the argument you gave to --prefix when you configured
-(/usr/local by default), with /info/chrony.info on the end.  The second
+(/usr/local by default), with /share/info/chrony.info on the end.  The second
 argument is the location of the file called 'dir'.  This will typically be
-/usr/info/dir.  So the typical command line would be
+/usr/share/info/dir.  So the typical command line would be
 
-    install-info /usr/local/info/chrony.info /usr/info/dir
+    install-info /usr/local/share/info/chrony.info /usr/share/info/dir
 
 Now that the software is successfully installed, the next step is to
 set up a configuration file.  The contents of this depend on the

README

@@ -103,11 +103,8 @@ by sending mail with the subject "subscribe" to
 
 chrony-announce-request@chrony.tuxfamily.org
 
-These messages will be copied to chrony-users (see below).  I also try
-to announce new versions on Freshmeat (http://freshmeat.net/).
-
-I don't reliably announce via news any more - I don't tend to keep up
-with news as I haven't enough time.
+These messages will be copied to chrony-users (see below).  New versions
+are announced also on Freshmeat (http://freshmeat.net/).
 
 How can I get support for chrony?
 and where can I discuss new features, possible bugs etc?

chrony.1

@@ -1,4 +1,4 @@
-.TH CHRONY 1 "August 10, 2001" chrony "User's Manual"
+.TH CHRONY 1 "December 04, 2009" chrony "User's Manual"
 .SH NAME
 chrony \- programs for keeping computer clocks accurate
 
@@ -30,7 +30,7 @@ gains or loses time and uses this information to keep it accurate
 between measurements from the reference.
 
 The reference time can be derived from either Network Time Protocol
-(NTP) servers (preferred), or wristwatch-and-keyboard (via \fIchronyc\fR).
+(NTP) servers, reference clocks, or wristwatch-and-keyboard (via \fIchronyc\fR).
 The main source of information about the Network Time Protocol is
 \fIhttp://www.eecis.udel.edu/~ntp\fR.
 
@@ -49,6 +49,8 @@ On an ethernet LAN : 100-200 microseconds, often much better
 On a V32bis dial-up modem connection : 10's of milliseconds (from one
 session to the next)
 
+With a good reference clock the accuracy can reach one microsecond.
+
 \fIchronyd\fR can also operate as an RFC1305-compatible NTP server and peer.
 
 .SH "SEE ALSO"

chrony.conf.5

@@ -1,4 +1,4 @@
-.TH chrony.conf 5 "August 10, 2001" chrony "Configuration Files"
+.TH chrony.conf 5 "December 04, 2009" chrony "Configuration Files"
 .SH NAME
 chrony.conf \- chronyd configuration file
 
@@ -37,7 +37,7 @@ useful configuration file would look something like
 .SH "SEE ALSO"
 .BR chrony(1),
 .BR chronyc(1),
-.BR chronyd(1)
+.BR chronyd(8)
 
 .I http://chrony.tuxfamily.org/
 

chrony.texi

@@ -424,12 +424,12 @@ to run the @command{install-info} command manually after this step.
 @command{install-info} takes 2 arguments.  The first is the path to the
 @file{chrony.info} file you have just installed.  This will be the argument you
 gave to --prefix when you configured (@file{/usr/local} by default), with
-@file{/info/chrony.info} on the end.  The second argument is the location of
-the file called @file{dir}.  This will typically be @file{/usr/info/dir}.  So
+@file{/share/info/chrony.info} on the end.  The second argument is the location of
+the file called @file{dir}.  This will typically be @file{/usr/share/info/dir}.  So
 the typical command line would be
 
 @example
-install-info /usr/local/info/chrony.info /usr/info/dir
+install-info /usr/local/share/info/chrony.info /usr/share/info/dir
 @end example
     
 Now that the software is successfully installed, the next step is to
@@ -488,7 +488,7 @@ This defines the directory containing the @file{libncurses.a} or
 The configure and make procedures have some extra options that may be useful if
 you are building a distribution package for chrony.
 
-The --infodir=DIR option to configure specifies a different install directory
+The --infodir=DIR option to configure specifies an install directory
 for the info files.  This overrides the @file{info} subdirectory of the
 argument to the --prefix option.  For example, you might use
 
@@ -496,7 +496,7 @@ argument to the --prefix option.  For example, you might use
 ./configure --prefix=/usr --infodir=/usr/share/info
 @end example
 
-The --mandir=DIR option to configure specifies a different install directory
+The --mandir=DIR option to configure specifies an install directory
 for the man pages.  This overrides the @file{man} subdirectory of the
 argument to the --prefix option.
 

chronyc.1

@@ -1,4 +1,4 @@
-.TH CHRONYC 1 "August 10, 2001" chrony "User's Manual"
+.TH CHRONYC 1 "December 04, 2009" chrony "User's Manual"
 .SH NAME
 chronyc \- command-line interface for chronyd
 
@@ -47,7 +47,7 @@ interactively.
 1.24
 
 .SH BUGS
-To report bugs, please contact the author and/or visit \fIhttp://chrony.tuxfamily.org
+To report bugs, please visit \fIhttp://chrony.tuxfamily.org\fR
 
 .SH "SEE ALSO"
 .BR chronyd(8),

chronyd.8

@@ -1,4 +1,4 @@
-.TH CHRONYD 8 "August 10, 2001" chrony "System Administration"
+.TH CHRONYD 8 "December 04, 2009" chrony "System Administration"
 .SH NAME
 chronyd \- chrony background daemon
 
@@ -105,10 +105,10 @@ Resolve hostnames only to IPv6 addresses.
 \fI/etc/chrony.conf\fR
 
 .SH VERSION
-Version 1.17
+Version 1.24
 
 .SH BUGS
-To report bugs, please contact the author and/or visit \fIhttp://chrony.tuxfamily.org/\fR
+To report bugs, please visit \fIhttp://chrony.tuxfamily.org/\fR
 
 .SH "SEE ALSO"
 \fBchronyd\fR is documented in detail in the documentation supplied with the

examples/chrony.conf.example

@@ -1,9 +1,8 @@
 #######################################################################
-# $Header: /cvs/src/chrony/examples/chrony.conf.example,v 1.2 2002/02/03 21:46:29 richard Exp $
 #
 # This is an example chrony configuration file.  You should copy it to
 # /etc/chrony.conf after uncommenting and editing the options that you
-# want to enable.  I have not included the more obscure options.  Refer
+# want to enable.  The more obscure options are not included.  Refer
 # to the documentation for these.
 #
 # Copyright 2002 Richard P. Curnow
@@ -157,8 +156,8 @@ commandkey 1
 ! logdir /var/log/chrony
 ! log measurements statistics tracking
 
-If you have real time clock support enabled (see below), you might want
-this line instead:
+# If you have real time clock support enabled (see below), you might want
+# this line instead:
 
 ! log measurements statistics tracking rtc
 
@@ -209,6 +208,12 @@ this line instead:
 
 ! noclientlog
 
+# The clientlog size is limited to 512KB by default.  If you have many
+# clients, especially in many different subnets, you might want to
+# increase the limit. 
+
+! clientloglimit 4194304
+
 #######################################################################
 ### REPORTING BIG CLOCK CHANGES
 # Perhaps you want to know if chronyd suddenly detects any large error