If a SHM or PHC refclock has a very large offset compensated by the
offset option, or ignored with the pps or local option, there is a
persistent loss of precision in the calculation of the sample offset
using the double format.
Rework the code to delay the calculation of the accumulated offset to
include the specificed compensation and remaining correction of the
system clock, where the calculation can be split to improve the
precision. In the pps mode ignore integer seconds competely.
The precision of the SOCK refclock is now limited to 1 nanosecond due to
the extra double->timespec->double conversion.
Add "local" option to specify that the reference clock is an
unsynchronized clock which is more stable than the system clock (e.g.
TCXO, OCXO, or atomic clock) and it should be used as a local standard
to stabilize the system clock.
Handle the local refclock as a PPS refclock locked to itself which gives
the unsynchronized status to be ignored in the source selection. Wait
for the refclock to get at least minsamples samples and adjust the clock
directly to follow changes in the refclock's sourcestats frequency and
offset.
There should be at most one refclock specified with this option.
This option is for indicating to chronyd that the reference clock is
kept in TAI and that chrony should attempt to convert from TAI to UTC by
using the timezone configured by the "leapsectz" directive.
Add width option to the refclock directive to set expected width of
pulses in a PPS signal. The width adds a limit for the maximum offset
and root distance in order to reject PPS samples from wrong events, e.g.
PHCs which cannot be configured to timestamp only rising of falling
edges.
Add extpps driver option to the PHC refclock to enable external
timestamping of PPS signal and also options to configure the channel and
pin index. In this mode, the driver polling function accumulates samples
for hwclock, which is used to convert received timestamping events to
local time.
Add pps option to the refclock directive to force chronyd to treat any
refclock as a PPS refclock. This is intended for refclocks that may
provide time off by a whole number of seconds due to missing or wrong
TAI/GPS->UTC conversion.
Split RCL_AddPulse() in order to provide a new function for refclock
drivers which can make PPS samples without having raw system time, e.g.
from PHC timestamps.
The maxlockage option specifies in number of pulses how old can be
samples from the refclock specified by the lock option to be paired with
the pulses. Increasing this value is useful when the samples are
produced at a lower rate than the pulses.
Replace struct timeval with struct timespec as the main data type for
timestamps. This will allow the NTP code to work with timestamps in
nanosecond resolution.
The minsamples and maxsamples directives now set the default value,
which can be overriden for individual sources in the server/peer/pool
and refclock directives.
