Add a new field to the CLIENT_ACCESSES_BY_INDEX request to specify the
minimum number of NTP or cmdmon packets for a client to be reported.
Add -p option to the chronyc clients command to specify the threshold
(by default 0). This option can be used to minimize the number of cmdmon
requests when interested only in clients sending a large number
of requests.
Add a flag to the CLIENT_ACCESSES_BY_INDEX request to reset the
NTP/cmdmon hits/dropped counters after reporting the current values.
Add -r option to the chronyc clients command to perform the reset. This
should make it easier to find clients that send large number of requests
over short periods of time.
The reset command drops all measurements and switches the reference to
the unsynchronised state. This command can help chronyd with recovery
when the measurements are known to be no longer valid or accurate, e.g.
due to moving the computer to a different network, or resuming the
computer from a low-power state (which resets the system clock).
Allow the nts and ntsport options to be specified for sources added from
chronyc. This is an incompatible change in the request, but there was no
release using the new REQ_ADD_SOURCE command yet.
Add -a option to the sources and sourcestats commands to print all
sources, including those that don't have a resolved address yet. By
default, only sources that have a real address are printed for
compatibility. Remove the "210 Number of sources" messages to avoid
confusion. Also, modify the ntpdata command to always print only sources
with a resolved address.
Add a new command to print the original name of a source specified by
address. This could be useful in scripts to avoid having to run the
sources command with and without -N.
Add -N option to chronyc to print the original names by which the
sources were specified instead of using reverse DNS lookup. The option
works in the sources, sourcestats and tracking commands.
Modify the request for adding a source to provide the name of the source
instead of its address (resolved in chronyc) in order to enable chronyd
to replace the source, support an "add pool" command, and enable an NTS
client to verify the server's certificate.
The name resolving does not block the response. Success is indicated
even if the name cannot be resolved, or a source with the same address
is already present.
To prevent unresolvable names from getting to chronyd, chronyc does not
send the request if it could not resolve the name itself (assuming they
are both running on the same host using the same resolver).
Reorder the LOGS_Severity enum in order of severity and change the code
to not log/print messages with severity below the specified minimum
instead of having a separate debug level.
In chronyc handle SIGPIPE similarly to SIGTERM. In chronyd ignore the
signal to avoid crashing when a TCP socket will be needed (e.g. for
NTS-KE) and will be unexpectedly closed from the other side.
Fix mismatches between the format and sign of variables passed to
printf() or scanf(), which were found in a Frama-C analysis and gcc
using the -Wformat-signedness option.
Remove spaces from tab-completion results and now break on a space.
Tested with both readline and editline (libedit)
Incorporated Miroslav's suggestions.
The onoffline command tells chronyd to switch all sources to the online
or offline status according to the current network configuration. A
source is considered online if it is possible to send requests to it,
i.e. a route to the network is present.
Rework the code to not ignore valid packets with unknown or obsolete
responses and return immediately with "bad reply from daemon" instead of
timing out with "cannot talk to daemon".
Make the length of responses containing manual samples constant to
simplify the protocol. It was the only type of response that had a
variable length.
This reverts commit 2343e7a89c.
When the burst option is specified in the server/pool directive and the
current poll is longer than the minimum poll, initiate on each poll a
burst with 1 good sample and 2 or 4 total samples according to the
difference between the current and minimum poll.
Before reading the n_samples field of the MANUAL_LIST reply, check if it
is actually contained in the received message. This does not change the
outcome of the client's length check as the returned length was always
larger than the length of the truncated reply and it was dropped anyway,
but it prevents the client from reading uninitialized memory.
If chronyc sent a request which caused chronyd to step the clock (e.g.
makestep, settime) and the second reading of the clock before calling
select() to wait for a response happened after the clock was stepped, a
new request could be sent immediately and chronyd would process the same
command twice. If the second request failed (e.g. a settime request too
close to the first request), chronyc would report an error.
Change the submit_request() function to read the clock only once per
select() to wait for the first response even when the clock was stepped.
If the system clock was stepped forward after chronyc sent a request and
before it read the clock in order to calculate the receive timeout,
select() could be called with a negative timeout, which resulted in an
infinite loop waiting for select() to succeed.
Fix the submit_request() function to not call select() with a negative
timeout. Also, return immediately on any error of select().
The sources and sourcestats commands accept -v as an option, but the
glibc implementation of getopt() reorders the arguments and parses the
option as a command-line option of chronyc.
Add '+' to the getopt string to disable this feature. Other getopt()
implementations should consider it a new command-line option, which will
be handled as an error if present.
Don't give up when one of the addresses/hostnames specified by -h fails
to resolve in DNS_Name2IPAddress(), e.g. with the default setting try to
connect to ::1 even when 127.0.0.1 failed due to the -6 option.
It was never used for anything and messages in debug output already
include filenames, which can be easily grepped if there is a need
to see log messages only from a particular file.
This is an incompatible change in the output of the tracking command,
which may break some scripts, but it's necessary to avoid confusion with
IPv4 addresses when synchronised to an IPv6 server or reference clock.
Don't rely on random source port of a connected socket alone as a
protection against spoofed packets in chronyc. Generate a fully random
32-bit sequence number for each request and modify the code to not send
a new request until the timeout expires or a valid response is received.
For a monitoring protocol this should be more than good enough.
Add xleave option to the peer directive to enable an interleaved mode
compatible with ntpd. This allows peers to exchange transmit timestamps
captured after the actual transmission and significantly improve
the accuracy of the measurements.
Replace struct timeval with struct timespec as the main data type for
timestamps. This will allow the NTP code to work with timestamps in
nanosecond resolution.
Add offset option to the server/pool/peer directive. It specifies a
correction which will be applied to offsets measured with the NTP
source. It's particularly useful to compensate for a known asymmetry in
network delay or timestamping errors.
Add a new option (-c) to chronyc to enable printing of reports in a
column-separated values (CSV) format. IP addresses will not be resolved
to hostnames, time will be printed as number of seconds since the epoch
and values in seconds will not be converted to other units.
Add a new printf-like function to allow printing of all fields at once
and rework all commands which print a report to use it. Add functions
for printing of headers and information fields, and formatting of IP
addresses and reference IDs.
There was an incompatible change in the client access report. To avoid
bumping the protocol version drop support for the original request/reply
types and define new CLIENT_ACCESSES_BY_INDEX2 types as a newer version
of the command.
