Reduce the minimum number of samples required by the filter from
min(4, length) to 1.
This makes the filtering less confusing. The sample lifetime is limited
to one poll and the default filtering of the SOCK refclock (where the
maximum number of samples per poll is unknown) is identical to the other
refclocks.
A concern with potential variability in number of samples per poll below
4 is switching between different calculations of dispersion in
combine_selected_samples() in samplefilt.c.
The 106-refclock test shows how the order of refclocks in the config can
impact the first filtered sample and selection. If the PPS refclock
follows SHM, a single low-quality PPS sample is accepted in the same
poll where SHM is selected and the initial clock correction started,
which causes larger skew later and delays the first selection of the PPS
refclock.
Update the reachability register of a refclock source by 1 if a valid
measurement is received by the drivers between source polls, and not
only when it is accumulated to sourcestats, similarly to how
reachability works with NTP sources.
This avoids drops in the reported reachability when a PHC refclock is
dropping samples due to significant changes in the measured delay (e.g.
due to high PCIe load), or a PPS refclock dropping samples due to failed
lock.
Add "local" option to specify that the reference clock is an
unsynchronized clock which is more stable than the system clock (e.g.
TCXO, OCXO, or atomic clock) and it should be used as a local standard
to stabilize the system clock.
Handle the local refclock as a PPS refclock locked to itself which gives
the unsynchronized status to be ignored in the source selection. Wait
for the refclock to get at least minsamples samples and adjust the clock
directly to follow changes in the refclock's sourcestats frequency and
offset.
There should be at most one refclock specified with this option.
Use clknetsim to run multiple chronyd instances with simulated clocks
and network. It allows fast and reproducible testing, without real
network.
Included are several tests of performance in different clock/network
conditions, chronyd options, NTP authentication, chronyc, and past bug
fixes.
