If the MAC in NTPv4 requests would be truncated, use version 3 by
default to avoid the truncation. This is necessary for compatibility
with older chronyd servers, which do not respond to messages with
truncated MACs.
In order to allow deterministic parsing of NTPv4 extension fields, the
MAC must not be longer than 192 bits (RFC 7822). One way to get around
this limitation when using symmetric keys which produce longer MACs is
to truncate them to 192 bits (32-bit key ID and 160-bit hash).
Modify the code to accept NTPv4 packets with MACs truncated to 192
bits, but still allow long MACs in NTPv4 packets to not break
compatibility with older chrony clients.
In a burst of three requests (two presend + one normal) the server can
detect the client is using the interleaved mode and save the transmit
timestamp of the second response for the third response. This shortens
the interval in which the server has to keep the state.
Rework the code to make a real request for presend and process the
response, but don't accumulate the sample. This allows presend to work
in the interleaved client mode.
Always allow update from the first valid response, even if its transmit
timestamp is not newer than the currently saved timestamp. This shoud
provide a temporary protection in the case where the attacker does have
an authenticated packet from future, but the peers are using the same
polling interval and the protocol is already synchronised. This could be
also useful in the case where the attacker cannot observe the traffic
and authentication is disabled.
A recently published paper [1] (section VIII) describes a DoS attack
on symmetric associations authenticated with a symmetric key where the
attacker can only observe and replay packets. Although the attacker
cannot prevent packets from reaching the other peer (not even by
flooding the network for example), s/he has the same power as a MitM
attacker.
As the authors explain, this is a fundamental flaw of the protocol,
which cannot be fixed in the general case. However, we can at least try
to protect associations in a case where the peers use the same polling
interval (i.e. for each request is expected one response) and all peers
that share the symmetric key never start with clocks in future or very
distant past (i.e. the attacker does not have any packets from future
that could be replayed).
Require that updates of the NTP state between requests have increasing
transmit timestamp and when a packet that passed all NTP tests to be
considered a valid response was received, don't allow any more updates
of the state from packets that don't pass the tests. This should ensure
the last update of the state is from the first time the last real
response was received and still allow the protocol to recover in case
one of the peers steps its clock back or the attacker does have a packet
from future and the attack stops.
[1] Aanchal Malhotra, Matthew Van Gundy, Mayank Varia, Haydn Kennedy,
Jonathan Gardner, and Sharon Goldberg. The Security of NTP's
Datagram Protocol. https://eprint.iacr.org/2016/1006
Adapt the interleaved symmetric mode for client/server associations.
On server, save the state needed for detection and responding in the
interleaved mode in the client log. On client, enable the interleaved
mode when the server is specified with the xleave option. Always accept
responses in basic mode to allow synchronization with servers that
don't support the interleaved mode, have too many clients, or have
multiple clients behing the same IP address. This is also necessary to
prevent DoS attacks on the client by overwriting or flushing the server
state. Protect the client's state variables against replay attacks as
the timestamps are now needed when processing the subsequent packet.
Add xleave option to the peer directive to enable an interleaved mode
compatible with ntpd. This allows peers to exchange transmit timestamps
captured after the actual transmission and significantly improve
the accuracy of the measurements.
Introduce a new structure for local timestamps that will hold the
timestamp with its estimated error and also its source (daemon, kernel
or HW). While at it, reorder parameters of the functions that accept the
timestamps.
Add new functions for processing of packets after they are actually
sent by the kernel or HW in order to get a more accurate transmit
timestamp. Rename old functions for processing of received packets and
their parameters to make the naming more consistent.
Replace struct timeval with struct timespec as the main data type for
timestamps. This will allow the NTP code to work with timestamps in
nanosecond resolution.
Crypto-NAK is useful only with Autokey where it allows quick reset
of the association. There is no plan to support Autokey and NTS will
specify its own message for authentication errors.
When selecting sources from a pool, ignore responses which didn't
produce a new sample. Sources with acceptable delay (as configured by
the maxdelay* options) should be prefered.
When a valid packet is received from an unsynchronised source (i.e. only
a test of leap, stratum or root distance failed), there is no point in
waiting for another packet or the RX timeout, and the client socket can
be immediately closed.
Add support for authenticating MS-SNTP responses in Samba (ntp_signd).
Supported is currently only the old MS-SNTP authenticator field. It's
disabled by default. It can be enabled with the --enable-ntp-signd
configure option and the ntpsigndsocket directive, which specifies the
location of the Samba ntp_signd socket.
When a received packet fails to authenticate, check if the digest
contains zeroes and treat it as an MS-SNTP packet with authenticator or
extended authenticator field. For now, discard these packets, i.e. don't
respond with a crypto-NAK.
Replace the flag that enables authentication using a symmetric key with
an enum. Specify crypto-NAK as a special mode used for responses instead
of relying on zero key ID. Also, rework check_packet_auth() to always
save the mode and key ID.
Add offset option to the server/pool/peer directive. It specifies a
correction which will be applied to offsets measured with the NTP
source. It's particularly useful to compensate for a known asymmetry in
network delay or timestamping errors.
If a special reference mode is enabled, always pass the test for
synchronization loop. This allows chronyd using the initstepslew
directive (or the -q/-Q option) to accept time from its own clients
after restart as is documented in the chrony.conf man page.
This was broken since update to NTPv4.
If local reference is active, return normal leap, but unsynchronised
status. Update the callers of the function to work with the leap
directly and not change their behaviour.
REF_IsLocalActive() is no longer needed.
When ntpd as an NTP server has active orphan mode, it doesn't update
its reference time and the reference timestamp may fail the NTP test
3 and 7. (https://bugs.ntp.org/show_bug.cgi?id=1098)
Remove both checks of the timestamp to allow chronyd to operate as
a client of ntpd server in the orphan mode. When ntpd is fixed and
old versions are no longer used, this may be reverted.
When a valid NTP reply is received, save the local address (e.g. from
IP_PKTINFO), so the reference ID which would the source use for this
host can be calculated when needed.
After restricting authentication of servers and peers to the specified
key, a short key in the key file is a security problem from the client's
point of view only if it's specified for a source.
