When the local reference is configured with the orphan option, NTP
sources that have stratum equal to the configured local stratum are
considered to be orphans (i.e. serving local time while not being
synchronised with real time) and are excluded from the normal source
selection. Sources with stratum larger than the local stratum are
considered to be directly on indirectly synchronised to an orphan and
are always ignored.
If no selectable source is available and all orphan sources have
reference IDs larger than the local ID, no source will be selected and
the local reference mode will be activated at some point, i.e. this host
will become an orphan. Otherwise, the orphan source with the smallest
reference ID will be selected. This ensures a group of servers polling
each other (with the same orphan configuration) which have no external
source can settle down to a state where only one server is serving its
local unsychronised time and others are synchronised to it.
Similarly to unreachable sources and falsetickers, try to replace
sources with distance larger than the limit set by the maxdistance
directive with a newly resolved address of the hostname.
Require that at least one of the sources specified with this option is
selectable (i.e. recently reachable and not a falseticker) before
updating the clock. Together with the trust option this may be useful to
allow a trusted, but not very precise, reference clock or a trusted
authenticated NTP source to be safely combined with unauthenticated NTP
sources in order to improve the accuracy of the clock. They can be
selected and used for synchronization only if they agree with the
trusted and required source.
Assume time from a source that is specified with the trust option is
always true. It can't be rejected as falseticker in the source
selection if sources that are specified without this option don't agree
with it.
Add maxdistance directive to set the maximum root distance the sources
are allowed to have to be selected. This is useful to reject NTPv4
sources that are no longer synchronized and report large dispersion.
The default value is 3 seconds.
Create logdir and dumpdir before dropping root. Set their uid/gid to the
user chronyd will switch to. This allows chronyd to create the
directories in a directory where the user won't have write permissions
(e.g. /var/lib).
When reducing the list of selectable sources to sources with the prefer
option, sources before the first preferred source were left with the
SRC_OK status, which triggered an assertion failure in the next
selection.
The minsamples and maxsamples directives now set the default value,
which can be overriden for individual sources in the server/peer/pool
and refclock directives.
Add new functions to change source's reference ID/address and reset the
instance. Use that instead of destroying and creating a new instance
when the NTP address is changed.
The pool directive can be used to configure chronyd for a pool of NTP
servers (e.g. pool.ntp.org). The name is expected to resolve to multiple
addresses which change over time.
On start, a source will be added for each resolved address. When a
source from the pool is unreachable or marked as falseticker, chronyd
will try to replace the source with a newly resolved address of the
pool.
The minimum interval between replacements is currently set to 244
seconds to avoid frequent DNS requests.
With the recent change allowing unreachable sources to remain selected,
offline sources will now be selectable only for some time, similarly to
online unreachable sources.
Reachability is no longer a requirement for selection. An unreachable
source can remain selected if its newest sample is not older than the
oldest sample from all reachable sources.
This is useful to prevent reselection when an accurate source uses a
very short polling interval (e.g. refclock) and is occasionally
unreachable for short periods of time.
Add new source states and rename some states so there is one state for
each reason a source can be rejected in the source selection.
This fixes reported status when sources are selectable, but the actual
selection was postponed until next update. It will also allow more
detailed reports when the cmdmon protocol is updated.
Following RFC 5905, don't call REF_SetUnsynchronised() when there are no
reachable or selectable sources. It's up to the client to consider the
source unsynchronized when the root distance exceeds a threshold.
The unsynchronized status is still set when no majority is reached.
This should reduce the number of possible memory leaks reported by
valgrind. The remaining reported leaks are sched tqe allocation, async
DNS instance allocation, cmdmon response/timestamp cell allocation, and
clientlog subnet allocation.
When current time is within 5 seconds of a leap second, don't accumulate
new samples or update the leap second status to increase the chances of
getting through safely.
Don't stop online burst for unreachable sources until sending succeeds.
This is mainly useful with iburst when chronyd is started before the
network is configured.
Add a new change type and use it when an unexpected time jump is
detected in the scheduler to reset reference times, offset and slewing,
NCR instances (with their polling interval), synchronization status, and
drop all sourcestats, manual, refclock and RTC samples.
This should make the recovery more graceful if the estimated jump has a
large error (e.g. select didn't timeout, or after system suspend).
When source is set as active, it's receiving reachability updates (e.g.
offline NTP sources are not active).
Also add function to count active sources.
Instead of giving up when a source has 7 reach updates, continue as long
as at least one source has fewer than 7 updates and can still have 3
samples to be selectable in that number of updates.
When no sources are responding, it will give up sooner.
Explicitly set the number of iburst samples to the size of the register
to make sure there are at least 7 reachability updates and the
initstepslew mode can be ended.
The initstepslew code has its own minimal NTP implementation. Drop the
code, add a new initstepslew mode to the reference updating code and
use regular NTP sources with iburst flag for initstepslew addresses
instead. When an update is made or a source is found unreachable, log a
message, remove the initstepslew sources and switch to normal mode.
This reduces code duplication and makes initstepslew use features
implemented only in the main code like source combining or SO_TIMESTAMP
support.
List of selectable sources that is used in combining was trimmed to
sources with prefer option, but scoring algorithm considered all
selectable sources. When a source without prefer was selected and
no source was combined, it caused assertion failure.
