Use the new asynchronous call to resolve addresses of NTP servers
configured by the server/peer directives. Introduce a callback to be
notified when the first resolving attempt ends to correctly finish
chronyd initialization (dumpfile reload and reference mode end).
The initstepslew code has its own minimal NTP implementation. Drop the
code, add a new initstepslew mode to the reference updating code and
use regular NTP sources with iburst flag for initstepslew addresses
instead. When an update is made or a source is found unreachable, log a
message, remove the initstepslew sources and switch to normal mode.
This reduces code duplication and makes initstepslew use features
implemented only in the main code like source combining or SO_TIMESTAMP
support.
Combine only sources whose distance is shorter than distance of the
selected source multiplied by the value of combinelimit and their
estimated frequencies are close to the frequency of the selected source.
Add outlyer status for sources which are selectable, but not included in
the combining. The status is displayed as '-' in the chronyc sources
output.
- normalize command line before parsing
- compare whole words
- check for missing/extra arguments in config parsing
- use strdup for string allocation
- share code for reporting syntax errors
- avoid using function pointers
- cleanup the code a bit
When chronyd is started with -R, the initstepslew directive and the
makestep directive with a positive limit will be ignored. This is useful
when restarting chronyd to avoid unnecessary clock adjustments. It can
be used with -r.
leapsectz directive is used to set the name of the timezone in the
system tz database which chronyd can use to find out when will the next
leap second occur. It will periodically check if dates Jun 30 23:59:60
and Dec 31 23:59:60 are valid in that timezone. This is mainly useful
with reference clocks which don't provide the leap second information.
It is not necessary to restart chronyd if the tz database is updated
with a new leap second at least 12 hours before the event.
This directive sets the maximum allowed offset corrected on a clock
update. The check is performed only after the specified number of
updates to allow a large initial adjustment of the system clock. When
an offset larger than the specified maximum occurs, it will be ignored
for the specified number of times and then chronyd will give up
and exit (a negative value can be used to never exit). In both cases
a message is sent to syslog.
The corrtimeratio directive controls the ratio between the
duration in which the clock is slewed for an average correction
according to the source history and the interval in which the
corrections are done (usually the NTP polling interval). Corrections
larger than the average take less time and smaller corrections take
more time, the amount of the correction and the correction time are
inversely proportional.
Increasing corrtimeratio makes the overall frequency error of
the system clock smaller, but increases the overall time error as
the corrections will take longer.
By default, the ratio is 1, which means the duration of an average
correction will be close to the update interval.
Instead of always selecting the source with minimum stratum, add weighted
stratum to the distance when comparing selectable sources. The weight
can be configured with new stratumweight directive and can be set to
zero to ignore stratum completely, by default 1.0.
Each source has a score against currently selected source which is
updated (multiplied by ratio of their distances) when one of the two
sources has a new sample. When the score reaches a limit, the source
will be selected. This should allow to slowly select the source with
minimum distance without frequent reselecting.
To avoid switching between sources with very variable distances (e.g. on
LAN or when upstream server uses a longer polling interval), sources
that are currently not selected are penalized by a fixed distance. This
can be configured with new reselectdist directive (100 microseconds by
default).
Require that the ratio of the increase in delay from the minimum one in
the stats data register to the standard deviation of the offsets in the
register is less than maxdelaydevratio or the difference between
measured offset and predicted offset is larger than the increase in
delay. In the allowed delay increase is included also skew and maximum
clock frequency error.
maxdelaydevratio is 10.0 by default.
Instead of following skew changes, adjust polling interval so that the
number of measurements used in the regression algorithm remains close to
a target value. It can be configured with a new polltarget option
(6 by default).
Resolving is retried in increasing intervals (maximum is one hour)
until it succeeds or fails with a non-temporary error.
Unresolved sources are included in the activity report as offline
sources and the online command can be used to retry it immediately.
This could be improved by resolving in a separate thread/process
to avoid blocking.
Instead of retrying to resolve it in the function and blocking for a
long time, return a TryAgain status and let the caller retry it later if
necessary.
A new tempcomp directive can be used to specify a file for reading
current temperature, update interval and compensation coefficients. The
clock frequency corrections are applied in local module and are invisible
in upper layers. The measurements and corrections can be logged to
tempcomp.log file.
Fallback drifts are long-term averages of the system clock drift
calculated over exponentially increasing intervals. They are used when
the clock is unsynchronised to avoid quickly drifting away from true
time if there was a short-term deviation in drift before the
synchronisation was lost.
Currently, on multihomed host, when chrony is not bound to a specific
IP address, a query is sent to an interface and the default source IP
hint for the back route differs, the reply will have a source IP
different than where the query was destinied to. This will cause
problems because connection tracking firewalls will drop the replies
and most likely the client program will get confused too.
This patch uses the IP_PKTINFO mechanism to get the IP address where
received packets where targetted to and use that IP address as source
hint when sending a reply.
The attached patch adds support for mlockall() as well as the SCHED_FIFO
real-time scheduler. It should result in reduced (and more consistent)
latency. Usage is documented in all the documents.
This is a verbatim copy of the files at that stage of the repository that was
built from the CVS import. It allows future development to see a bit of recent
history, but without carrying around the baggage going back to 1997. If that
is really required, git grafts can be used.
