If synchronised to a stratum 15 source, return stratum of 16 instead of
0 in the tracking report. It will not match the value in server mode
packets, but it should be less confusing.
Use the timezone specified by the leapsectz directive to get the
current TAI-UTC offset and set the offset of the system clock in order
to provide correct TAI time to applications using ntp_adjtime(),
ntp_gettime(), or clock_gettime(CLOCK_TAI).
It was never used for anything and messages in debug output already
include filenames, which can be easily grepped if there is a need
to see log messages only from a particular file.
In unauthenticated interleaved symmetric NTP mode we should be now
careful with the reference timestamp as it may be useful with the peer
delay for estimating the local receive timestamp and increasing the
chance of spoofing a valid response from the peer.
When updating the reference time, add a random error of up to one second
to make it less sensitive when disclosed to NTP and cmdmon clients.
Replace struct timeval with struct timespec as the main data type for
timestamps. This will allow the NTP code to work with timestamps in
nanosecond resolution.
This allows a server that will become the orphan source to initialize
its time with the initstepslew directive from the current orphan source
or its clients.
Instead of using a timer for switching the reference to the
unsynchronised state (which activates the local reference), check
if it should be active when returning the reference parameters.
If local reference is active, return normal leap, but unsynchronised
status. Update the callers of the function to work with the leap
directly and not change their behaviour.
REF_IsLocalActive() is no longer needed.
Use REF_GetReferenceParams() in the tracking command to simplify the
code and report the same values as what NTP clients of the server see.
When the local reference mode is active, this changes the leap status to
synchronised and reference time to one second behind current time. When
not synchronised, the root delay and root dispersion are now 1 second.
Since the update to NTPv4, when the clock is in the synchronised state
and the clock updates stop (e.g. sources become unreachable), it doesn't
switch to the unsynchronised state and the local reference is never
activate. This can be a problem for clients that rely on the server to
always have root distance below some value (e.g. chronyd's maxdistance).
Add a timer that will activate the local reference when the root
distance reaches a specified threshold. It can be configured with the
distance option in the local directive (by default 1.0 second).
Timeout ID of zero can be now safely used to indicate that the timer is
not running. Remove the extra timer_running variables that were
necessary to track that.
Time smoothing determines an offset that needs to be applied to the
cooked time to make it smooth for external observers. Observed offset
and frequency change slowly and there are no discontinuities. This can
be used on an NTP server to make it easier for the clients to track the
time and keep their clocks close together even when large offset or
frequency corrections are applied to the server's clock (e.g. after
being offline for longer time).
Accumulated offset and frequency are smoothed out in three stages. In
the first stage, the frequency is changed at a constant rate (wander) up
to a maximum, in the second stage the frequency stays at the maximum for
as long as needed and in the third stage the frequency is brought back
to zero.
Time smoothing is configured by the smoothtime directive. It takes two
arguments, maximum frequency offset and maximum wander. It's disabled by
default.
During inserted leap second the time is invalid, reply with
unsynchronized status to avoid confusing clients that are not smart
enough to ignore measurements close to leap second.
In addition to the system driver handling add new modes to slew or step
the system clock for leap second, or ignore it completely. This can be
configured with leapsecmode directive.
This will be used to set the kernel adjtimex() variables to allow other
applications running on the system to know if the system clock is
synchronized and the estimated error and the maximum error.
The second form configures the automatic stepping, similarly to the
makestep directive. It has two parameters, stepping threshold (in
seconds) and number of future clock updates for which will be the
threshold active. This can be used with the burst command to quickly
make a new measurement and correct the clock by stepping if needed,
without waiting for chronyd to complete the measurement and update the
clock.
When current time is within 5 seconds of a leap second, don't accumulate
new samples or update the leap second status to increase the chances of
getting through safely.
