cb28aeeacc
For offset adjustments below 10 microseconds use kernel PLL with locked frequency and 1s time constant.
72 lines
2.8 KiB
C
72 lines
2.8 KiB
C
/* Taken from /usr/include/linux/timex.h. Avoids the need to
|
|
* include kernel header files. */
|
|
|
|
#ifndef CHRONY_TIMEX_H
|
|
#define CHRONY_TIMEX_H
|
|
|
|
#include <sys/time.h>
|
|
|
|
struct timex {
|
|
unsigned int modes; /* mode selector */
|
|
long offset; /* time offset (usec) */
|
|
long freq; /* frequency offset (scaled ppm) */
|
|
long maxerror; /* maximum error (usec) */
|
|
long esterror; /* estimated error (usec) */
|
|
int status; /* clock command/status */
|
|
long constant; /* pll time constant */
|
|
long precision; /* clock precision (usec) (read only) */
|
|
long tolerance; /* clock frequency tolerance (ppm)
|
|
* (read only)
|
|
*/
|
|
struct timeval time; /* (read only) */
|
|
long tick; /* (modified) usecs between clock ticks */
|
|
|
|
long ppsfreq; /* pps frequency (scaled ppm) (ro) */
|
|
long jitter; /* pps jitter (us) (ro) */
|
|
int shift; /* interval duration (s) (shift) (ro) */
|
|
long stabil; /* pps stability (scaled ppm) (ro) */
|
|
long jitcnt; /* jitter limit exceeded (ro) */
|
|
long calcnt; /* calibration intervals (ro) */
|
|
long errcnt; /* calibration errors (ro) */
|
|
long stbcnt; /* stability limit exceeded (ro) */
|
|
|
|
int :32; int :32; int :32; int :32;
|
|
int :32; int :32; int :32; int :32;
|
|
int :32; int :32; int :32; int :32;
|
|
};
|
|
|
|
#define ADJ_OFFSET 0x0001 /* time offset */
|
|
#define ADJ_FREQUENCY 0x0002 /* frequency offset */
|
|
#define ADJ_MAXERROR 0x0004 /* maximum time error */
|
|
#define ADJ_STATUS 0x0010 /* clock status */
|
|
#define ADJ_TIMECONST 0x0020 /* pll time constant */
|
|
#define ADJ_NANO 0x2000 /* select nanosecond resolution */
|
|
#define ADJ_TICK 0x4000 /* tick value */
|
|
#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
|
|
#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
|
|
|
|
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
|
|
|
|
#define STA_PLL 0x0001 /* enable PLL updates (rw) */
|
|
#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */
|
|
#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */
|
|
#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */
|
|
|
|
#define STA_INS 0x0010 /* insert leap (rw) */
|
|
#define STA_DEL 0x0020 /* delete leap (rw) */
|
|
#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */
|
|
#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */
|
|
|
|
#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */
|
|
#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */
|
|
#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */
|
|
#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
|
|
|
|
#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
|
|
#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
|
|
|
|
/* This doesn't seem to be in any include files !! */
|
|
|
|
extern int adjtimex(struct timex *);
|
|
|
|
#endif /* CHRONY_TIMEX_H */
|