273 lines
12 KiB
Text
273 lines
12 KiB
Text
:toc:
|
|
:numbered:
|
|
|
|
Frequently Asked Questions
|
|
==========================
|
|
|
|
== Chrony compared to other programs
|
|
|
|
=== How does +chrony+ compare to +ntpd+?
|
|
|
|
+chrony+ can usually synchronise the system clock faster and with better time
|
|
accuracy, but it doesn't implement all NTP features, e.g. broadcast/multicast
|
|
mode, or authentication based on public-key cryptography. For a more detailed
|
|
comparison, see the http://chrony.tuxfamily.org/comparison.html[comparison
|
|
page] on the chrony website and section
|
|
http://chrony.tuxfamily.org/manual.html#Comparison-with-ntpd[Comparison with
|
|
ntpd] in the manual.
|
|
|
|
If your computer connects to the 'net only for few minutes at a time, you turn
|
|
your Linux computer off or suspend it frequently, the clock is not very stable
|
|
(e.g. it is a virtual machine), or you want to use NTP on an isolated network
|
|
with no hardware clocks in sight, +chrony+ will probably work much better for
|
|
you.
|
|
|
|
The original reason +chrony+ was written was that ntpd (called xntpd at the
|
|
time) could not to do anything sensible on a PC which was connected to the 'net
|
|
only for about 5 minutes once or twice a day, mainly to upload/download email
|
|
and news. The requirements were
|
|
|
|
* slew the time to correct it when going online and NTP servers
|
|
become visible
|
|
* determine the rate at which the computer gains or loses time and
|
|
use this information to keep it reasonably correct between connects
|
|
to the 'net. This has to be done using a method that does not care
|
|
about the intermittent availability of the references or the fact
|
|
the computer is turned off between groups of measurements.
|
|
* maintain the time across reboots, by working out the error and
|
|
drift rate of the computer's real-time clock and using this
|
|
information to set the system clock correctly at boot up.
|
|
|
|
Also, when working with isolated networks with no true time references at all
|
|
ntpd was found to give no help with managing the local clock's gain/loss rate
|
|
on the NTP master node (which was set from watch). Some automated support was
|
|
added to +chrony+ to deal with this.
|
|
|
|
== Configuration issues
|
|
|
|
=== I have several computers on a LAN. Should be all clients of an external server?
|
|
|
|
The best configuration is usually to make one computer the master, with
|
|
the others as clients of it. Add a +local+ directive to the master's
|
|
'chrony.conf' file. This configuration will be better because
|
|
|
|
* the load on the external connection is less
|
|
* the load on the external NTP server(s) is less
|
|
* if your external connection goes down, the computers on the LAN
|
|
will maintain a common time with each other.
|
|
|
|
=== Must I specify servers by IP address if DNS is not available on chronyd start?
|
|
|
|
No. Starting from version 1.25, +chronyd+ will keep trying to resolve
|
|
the hostnames specified in the +server+ and +peer+ directives in
|
|
increasing intervals until it succeeds. The +online+ command can be
|
|
issued from +chronyc+ to try to resolve them immediately.
|
|
|
|
=== How can I make chronyd more secure?
|
|
|
|
If you don't need to serve time to NTP clients or peers, you can add +port 0+
|
|
to the 'chrony.conf' file to completely disable the NTP server functionality
|
|
and prevent NTP requests from reaching +chronyd+. Starting from version 2.0,
|
|
the NTP server port is open only when client access is allowed by the +allow+
|
|
directive or command, an NTP peer is configured, or the +broadcast+ directive
|
|
is used.
|
|
|
|
If you don't need to use +chronyc+ remotely, you can add the following
|
|
directives to the configuration file to bind the command sockets to the
|
|
loopback interface. This is done by default since version 2.0.
|
|
|
|
----
|
|
bindcmdaddress 127.0.0.1
|
|
bindcmdaddress ::1
|
|
----
|
|
|
|
If you don't need to use +chronyc+ at all, you can disable the command sockets
|
|
by adding +cmdport 0+ to the configuration file.
|
|
|
|
On Linux, if +chronyd+ is compiled with support for Linux capabilities
|
|
(available in the libcap library), you can specify an unprivileged user with
|
|
the +-u+ option or +user+ directive in the 'chrony.conf' file to drop root
|
|
privileges after start. The configure option +--with-user+ can be used to drop
|
|
the privileges by default.
|
|
|
|
=== How can I improve the accuracy of the system clock with NTP sources?
|
|
|
|
Select NTP servers that are well synchronised, stable and close to your
|
|
network. It's better to use more than one server, three or four is usually
|
|
recommended as the minimum, so +chronyd+ can detect falsetickers and combine
|
|
measurements from multiple sources.
|
|
|
|
There are also useful options which can be set in the +server+ directive, they
|
|
are +minpoll+, +maxpoll+, +polltarget+, +maxdelay+, +maxdelayratio+ and
|
|
+maxdelaydevratio+.
|
|
|
|
The first three options set the minimum and maximum allowed polling interval,
|
|
and how should be the actual interval adjusted in the specified range. Their
|
|
default values are 6 (64 seconds) for +minpoll+, 10 (1024 seconds) for
|
|
+maxpoll+ and 6 (samples) for +polltarget+. The default values should be used
|
|
for general servers on the internet. With your own NTP servers or if have
|
|
permission to poll some servers more frequently, setting these options for
|
|
shorter polling intervals may significantly improve the accuracy of the system
|
|
clock.
|
|
|
|
The optimal polling interval depends on many factors, including the ratio
|
|
between the wander of the clock and the network jitter (sometimes expressed in
|
|
NTP documents as the Allan intercept), the temperature sensitivity of the
|
|
crystal oscillator and the maximum rate of change of the temperature.
|
|
|
|
An example of the directive for an NTP server on the internet that you are
|
|
allowed to poll frequently could be
|
|
|
|
----
|
|
server foo.example.net minpoll 4 maxpoll 6 polltarget 16
|
|
----
|
|
|
|
An example using very short polling intervals for a server located in the same
|
|
LAN could be
|
|
|
|
----
|
|
server ntp.local minpoll 2 maxpoll 4 polltarget 30
|
|
----
|
|
|
|
The maxdelay options are useful to ignore measurements with larger delay (e.g.
|
|
due to congestion in the network) and improve the stability of the
|
|
synchronisation. The +maxdelaydevratio+ option could be added to the example
|
|
with local NTP server
|
|
|
|
----
|
|
server ntp.local minpoll 2 maxpoll 4 polltarget 30 maxdelaydevratio 2
|
|
----
|
|
|
|
== Computer is not synchronising
|
|
|
|
This is the most common problem. There are a number of reasons, see the
|
|
following questions.
|
|
|
|
=== Behind a firewall?
|
|
|
|
If there is a firewall between you and the NTP server you're trying to use, the
|
|
packets may be blocked. Try using a tool like wireshark or tcpdump to see if
|
|
you're getting responses from the server. If you have an external modem, see
|
|
if the receive light blinks straight after the transmit light (when the link is
|
|
quiet apart from the NTP traffic.) Try adding +log measurements+ to the
|
|
'chrony.conf' file and look in the 'measurements.log' file after +chrony+ has
|
|
been running for a short period. See if any measurements appear.
|
|
|
|
=== Are NTP servers specified with the +offline+ option?
|
|
|
|
Check that you're using +chronyc+\'s +online+ and +offline+ commands
|
|
appropriately. Again, check in 'measurements.log' to see if you're getting any
|
|
data back from the server.
|
|
|
|
== Issues with +chronyc+
|
|
|
|
=== I keep getting the error +506 Cannot talk to daemon+
|
|
|
|
When accessing +chronyd+ remotely, make sure that the 'chrony.conf' file (on
|
|
the computer where +chronyd+ is running) has a 'cmdallow' entry for the
|
|
computer you are running +chronyc+ on and an appropriate 'bindcmdaddress'
|
|
directive. This isn't necessary for localhost.
|
|
|
|
Perhaps +chronyd+ is not running. Try using the +ps+ command (e.g. on Linux,
|
|
+ps -auxw+) to see if it's running. Or try +netstat -a+ and see if the ports
|
|
123/udp and 323/udp are listening. If +chronyd+ is not running, you may have a
|
|
problem with the way you are trying to start it (e.g. at boot time).
|
|
|
|
Perhaps you have a firewall set up in a way that blocks packets on port
|
|
323/udp. You need to amend the firewall configuration in this case.
|
|
|
|
=== Is the +chronyc+ / +chronyd+ protocol documented anywhere?
|
|
|
|
Only by the source code :-) See 'cmdmon.c' (+chronyd+ side) and 'client.c'
|
|
(+chronyc+ side).
|
|
|
|
== Real-time clock issues
|
|
|
|
=== What is the real-time clock (RTC)?
|
|
|
|
This is the clock which keeps the time even when your computer is turned off.
|
|
It works with 1 second resolution. +chronyd+ can monitor the rate at which the
|
|
real-time clock gains or loses time, and compensate for it when you set the
|
|
system time from it at the next reboot. See the documentation for details.
|
|
|
|
=== I want to use +chronyd+'s real-time clock support. Must I disable hwclock?
|
|
|
|
The hwclock program is often set-up by default in the boot and shutdown scripts
|
|
with many Linux installations. If you want to use +chronyd+'s real-time clock
|
|
support, the important thing is to disable hwclock in the shutdown procedure.
|
|
If you don't, it will over-write the RTC with a new value, unknown to
|
|
+chronyd+. At the next reboot, +chronyd+ will compensate this (wrong) time
|
|
with its estimate of how far the RTC has drifted whilst the power was off,
|
|
giving a meaningless initial system time.
|
|
|
|
There is no need to remove hwclock from the boot process, as long as +chronyd+
|
|
is started after it has run.
|
|
|
|
=== I just keep getting the +513 RTC driver not running+ message
|
|
|
|
For the real time clock support to work, you need the following three
|
|
things
|
|
|
|
* a kernel that is supported (e.g. 2.2 onwards)
|
|
* enhanced RTC support compiled into the kernel
|
|
* an +rtcfile+ directive in your 'chrony.conf' file
|
|
|
|
== Microsoft Windows
|
|
|
|
=== Does +chrony+ support Windows?
|
|
|
|
No. The +chronyc+ program (the command-line client used for configuring
|
|
+chronyd+ while it is running) has been successfully built and run under
|
|
Cygwin in the past. +chronyd+ is not portable, because part of it is
|
|
very system-dependent. It needs adapting to work with Windows'
|
|
equivalent of the adjtimex() call, and it needs to be made to work as a
|
|
service.
|
|
|
|
=== Are there any plans to support Windows?
|
|
|
|
We have no plans to do this. Anyone is welcome to pick this work up and
|
|
contribute it back to the project.
|
|
|
|
== NTP-specific issues
|
|
|
|
=== Can +chrony+ be driven from broadcast NTP servers?
|
|
|
|
No, this NTP mode is not implemented yet.
|
|
|
|
=== Can chronyd transmit broadcast NTP packets (e.g. to synchronise other computers on a private LAN)?
|
|
|
|
Yes. Starting from version 1.17, +chrony+ has this capability.
|
|
|
|
=== Can +chrony+ keep the system clock a fixed offset away from real time?
|
|
|
|
This is not possible as the program currently stands.
|
|
|
|
=== What happens if the network connection is dropped without using +chronyc+'s +offline+ command first?
|
|
|
|
+chronyd+ will keep trying to access the server(s) that it thinks are online.
|
|
When the network is connected again, it will take some time (on average half of
|
|
the current polling interval) before new measurements are made and the clock is
|
|
corrected. If the servers were set to offline and the +online+ command was
|
|
issued when the network was connected, +chronyd+ would make new measurements
|
|
immediately.
|
|
|
|
The +auto_offline+ option to the +server+ entry in the 'chrony.conf' file may
|
|
be useful to switch the servers to the offline state automatically.
|
|
|
|
== Linux-specific issues
|
|
|
|
=== I get +Could not open /dev/rtc, Device or resource busy+ in my syslog file
|
|
|
|
Some other program running on the system may be using the device.
|
|
|
|
== Solaris-specific issues
|
|
|
|
=== I get an error message about not being able to open kvm to change dosynctodr
|
|
|
|
(The dosynctodr variable controls whether Solaris couples the equivalent
|
|
of its BIOS clock into its system clock at regular intervals). The
|
|
Solaris port of +chrony+ was developed in the Solaris 2.5 era. Some
|
|
aspect of the Solaris kernel has changed which prevents the same
|
|
technique working. We no longer have root access to any Solaris
|
|
machines to work on this, and we are reliant on somebody developing the
|
|
patch and testing it.
|