Miroslav Lichvar
16676ae726
Add -m option to allow multiple commands on command line
2010-10-04 15:53:35 +02:00
Miroslav Lichvar
fd3702f973
Add retries and timeout commands
2010-10-04 15:00:07 +02:00
Miroslav Lichvar
f924862e89
Add prefer and noselect options
2010-08-25 18:32:40 +02:00
Miroslav Lichvar
78300d018a
Add minstratum command
2010-08-25 17:43:17 +02:00
Miroslav Lichvar
e95676f65f
Document minstratum option
2010-08-25 17:43:15 +02:00
Miroslav Lichvar
fe4b661fe7
Add -n option to allow using syslog without forking
2010-08-19 17:21:11 +02:00
Miroslav Lichvar
a080d00352
Add rtcsync directive
...
The directive enables the 11 minute kernel mode. It cannot be used
when the normal RTC tracking is enabled.
2010-05-14 14:41:11 +02:00
Miroslav Lichvar
ab68a9d1d3
Set maxupdateskew to 1000 ppm by default
...
This will prevent from using unreliable frequency estimate on iburst
when starting without drift file.
2010-04-27 14:35:27 +02:00
Miroslav Lichvar
93b5b08bed
Add iburst server option
2010-04-27 14:35:27 +02:00
Miroslav Lichvar
c386d11765
Add temperature compensation
...
A new tempcomp directive can be used to specify a file for reading
current temperature, update interval and compensation coefficients. The
clock frequency corrections are applied in local module and are invisible
in upper layers. The measurements and corrections can be logged to
tempcomp.log file.
2010-04-27 14:35:11 +02:00
Miroslav Lichvar
f12bc10917
Add fallback drifts
...
Fallback drifts are long-term averages of the system clock drift
calculated over exponentially increasing intervals. They are used when
the clock is unsynchronised to avoid quickly drifting away from true
time if there was a short-term deviation in drift before the
synchronisation was lost.
2010-04-27 14:27:05 +02:00
Miroslav Lichvar
5fb5551c36
Add refclock precision
2010-03-02 14:23:54 +01:00
Miroslav Lichvar
97f2f16fd6
Log also filtered samples
2010-03-02 13:19:33 +01:00
Miroslav Lichvar
fc1514db04
Adjust refclock filter parameters
...
Drop only about 40 percent of samples, change default length to 64,
require at least 4 samples between polls (or full filter for lengths
below 4).
2010-03-02 13:19:33 +01:00
Miroslav Lichvar
8cb6fcad7e
Include offset correction error in dispersion
2010-02-16 18:38:46 +01:00
Miroslav Lichvar
75b7d33fb7
Update list of commands not using authentication in documentation
2010-02-04 13:07:19 +01:00
Miroslav Lichvar
f261251a9b
Add perm option to SHM driver
2010-01-28 10:10:16 +01:00
Miroslav Lichvar
a0e1154bfb
Add common refclock driver option parsing
2010-01-28 10:10:16 +01:00
Miroslav Lichvar
e261278a5c
Add lock option for PPS refclocks
2010-01-28 10:10:13 +01:00
Miroslav Lichvar
8a00758cf5
Add makestep directive
2010-01-25 15:51:15 +01:00
Miroslav Lichvar
15e154c09d
Handle immediate step in local module instead of system driver
...
This fixes the problem where scheduler wasn't notified about performed
steps and it also makes the command available on all supported systems.
2010-01-25 15:51:15 +01:00
Miroslav Lichvar
b32432c232
Move estimated offset and error to sourcestats report
...
And print the estimated offset in sourcestats output.
2009-12-14 10:34:33 +01:00
Miroslav Lichvar
2dd9f3373b
Replace integer microseconds in reports with floating-point values
2009-12-13 15:00:10 +01:00
Miroslav Lichvar
00a77fca52
Add dns command to configure DNS resolving in chronyc
2009-12-05 13:25:56 +01:00
Miroslav Lichvar
6031b35a7a
Update documentation a bit more
2009-12-04 13:12:38 +01:00
Miroslav Lichvar
e248a57d00
Update documentation
2009-12-02 15:35:15 +01:00
Miroslav Lichvar
1a8514a1a8
Swap leap signs in measurements log description
2009-11-30 16:54:04 +01:00
Miroslav Lichvar
7c53aca486
Add refclocks log
2009-11-30 16:54:00 +01:00
Miroslav Lichvar
6d242a33f5
Add PPS support to SOCK driver
2009-11-25 14:37:40 +01:00
Miroslav Lichvar
618f372e13
Add option to limit clientlog memory
2009-11-25 14:37:36 +01:00
Miroslav Lichvar
9716a2ed7e
Document -4 and -6 options
2009-11-09 14:35:39 +01:00
John G. Hasler
27cfc02468
Replaced references to sunsite with references to tuxfamily.
2009-10-29 16:14:39 -05:00
Miroslav Lichvar
8e23110aec
Update COPYING and FSF address
2009-10-28 17:53:33 +01:00
Miroslav Lichvar
f2f592fa0d
Update documentation for refclock and IPv6 support
2009-10-28 16:53:03 +01:00
Miroslav Lichvar
465e580a39
Remove forgotten text in server directive description
2009-10-28 16:31:58 +01:00
John Hasler
35e662d810
Add mlockall and SCHED_FIFO support
...
The attached patch adds support for mlockall() as well as the SCHED_FIFO
real-time scheduler. It should result in reduced (and more consistent)
latency. Usage is documented in all the documents.
2009-02-10 18:02:28 +01:00
Miroslav Lichvar
8f9c237010
Leap second support
...
Leap second status is accepted and forwarded to clients if majority
of selectable sources agree. The actual insertion/deletion is supported
only on Linux now.
2009-01-08 13:33:15 +01:00
Miroslav Lichvar
be42b4eeea
Linux capabilities support
...
Attached is a patch adding a linux capabilities support to chronyd. It
adds -u option which can be used to specify the user which chronyd
should switch to.
2008-11-05 23:50:48 +00:00
Richard Curnow
77da5b6144
RTC usage bails out cleanly if accessing it goes wrong (e.g. HPET without generic RTC emulation)
2006-01-19 21:37:13 +00:00
Richard P. Curnow
8884034104
Equivalent to V1.19.99.1
...
This is a verbatim copy of the files at that stage of the repository that was
built from the CVS import. It allows future development to see a bit of recent
history, but without carrying around the baggage going back to 1997. If that
is really required, git grafts can be used.
2006-01-19 21:34:28 +00:00
