The second form configures the automatic stepping, similarly to the
makestep directive. It has two parameters, stepping threshold (in
seconds) and number of future clock updates for which will be the
threshold active. This can be used with the burst command to quickly
make a new measurement and correct the clock by stepping if needed,
without waiting for chronyd to complete the measurement and update the
clock.
The minsamples and maxsamples directives now set the default value,
which can be overriden for individual sources in the server/peer/pool
and refclock directives.
A new option can be now used in the pool directive: maxsources sets the
maximum number of sources that can be used from the pool, the default
value is 4.
On start, when the pool name is resolved, chronyd will add up to 16
sources, one for each resolved address. When the number of sources from
which at least one valid reply was received reaches maxsources, the
other sources will be removed.
The pool directive can be used to configure chronyd for a pool of NTP
servers (e.g. pool.ntp.org). The name is expected to resolve to multiple
addresses which change over time.
On start, a source will be added for each resolved address. When a
source from the pool is unreachable or marked as falseticker, chronyd
will try to replace the source with a newly resolved address of the
pool.
The minimum interval between replacements is currently set to 244
seconds to avoid frequent DNS requests.
When the RTC preinit function fails, set the system clock to the time of
the last modification of the driftfile if it's in the future. This makes
the -s option somewhat useful on systems where RTC is not supported or
missing.
This is similar to the functionality implemented in the fake-hwclock
script.
Switch to NTP for presend as the echo service (RFC 862) is rarely
enabled. When presend is active, send an NTP client packet to the
server/peer and ignore the reply.
This also fixes presend with separate client sockets. The destination
port can't be changed on connected sockets, so the echo packet was sent
to the NTP port instead of the echo port.
Since the kernel USER_HZ constant was introduced and the internal HZ
can't be reliably detected in user-space, the frequency scaling constant
used with older kernels is just a random guess.
Remove the scaling completely and let the closed loop compensate for the
error. To prevent thrashing between two states when the system's
frequency error is close to a multiple of USER_HZ, stick to the current
tick value if it's next to the new required tick. This is used only on
archs where USER_HZ is 100 as the frequency adjustment is limited to 500
ppm.
The linux_hz and linux_freq_scale directives are no longer supported,
but allowed by the config parser.
With the generic driver, the maxslewrate directive sets the maximum
frequency offset that the driver is allowed to use to slew the time. By
default, it's set to 83333.333 (1/12). This is identical to what Linux
fast slewing used to use.
If there are extra arguments on the chronyd command line, they will be
parsed as lines in a configuration file and the normal configuration file
will be ignored.
